RSI , Recycling Sciences, LLC, (herein after referred to as RSI) Industrial Distillation Systems, are solvent recovery systems designed for high volume solvent waste streams in distinct batches. These batch systems range in size from the RSI-5, with a 5 gallon batch distillation tank, to the RSI-55, a 55 gallon batch distillation tank capacity. Depending on the tank capacity, systems can be ordered with either air powered pumps or electric powered pumps of the 120 Volt to 240 Volt classification. And vacuums can also be ordered with air powered or electric powered vacuum motors. Naturally, all are explosion proof so they can safely be operated in Group I, Division C and D, hazardous locations.

Each can recover a wide variety of solvents, used in most industrial processes, through heat distillation. RSI systems recover those solvents a batch at a time. For pictures and descriptions of solvent recovery by distilling solvents in a continuous stream, especially for BioDiesel production, click on the >> Continuous Flow'' or A Biodiesel Recovery @ buttons, to the left. For just information on Industrial solvent recycling distillation systems of specific sizes, click on the sized tank detail buttons to the left. The number in the product code is the distillation batch tank capacity in gallons.

RSI solvent recovery systems, depending on the contaminate in the solvent, can easily be cleaned. The residue can either be contained in a high temperature cooking bag or easily wiped out of the shiny stainless steel tank. The amount of hazardous waste that must be properly disposed of is drastically reduced and disposal costs, including transportation costs, new solvent purchases and EPA paper work are cut to a minimum. RSI Industrial systems can easily pay for themselves in a very short period of time..

All RSI Industrial systems are designed for the safe solvent recovery of volatile and flammable solvents. Each is designed to be explosion proof and is therefore well suited to distillation of flammable solvent. The RSI Industrial solvent recycling systems below the RSI-55 are portable and can be operated anywhere in the plant or factory that has adequate ventilation. All require either a 120 Volt or a 240 Volt electrical connection and each is built to withstand vacuum. The RSI-55 is a skid mounted system and includes a vacuum as standard equipment. Many Industrial plants have discovered they save up to 95% by solvent recycling on site, and reusing their solvents, over and over. Please remember that any contaminated solvent with a vaporization temperature of 350 F E should ALWAYS be recovered under vacuum.

Just about every type of industry has purchased and used RSI Industrial solvent recycling equipment, from Airlines companies, Electric plants and even to Zither manufacturers. Every purchaser of RSI Industrial solvent recycling systems has increased his profits and each has helped the environment in countless ways.

• Fast Solvent recovery rate
• Simple to Operate, Override switches
• Explosion proof construction and design
• Caster mounted for easy portability
• Rugged, all stainless construction
• Intrinsically Safe electrical design
• Wall mounted, safe electrical boxes featuring Fuji controllers
• 120 Volt or 240 Volt Circuitry and heater
• Automatic operation: Unattended system shut-off at completion
• Water cooled Tube-n-Tube condensers