Features:

• Fast Solvent recovery rate
• Simple to Operate
• Explosion proof construction and design
• Rugged, all stainless construction
• Mounted on a galvanized steel pallet
• Intrinsically Safe electrical design
• Wall mounted, safe electrical boxes featuring Fuji controllers
• 240 Volt Circuitry and heater
• Automatic operation: Unattended system shut-off at completion
• Water cooled Tube-n-Tube condenser

Technical Information

The RSI-55, is a 55 gallon tank capacity solvent recovery system, This one is equipped with its own air powered vacuum system as well as its own air powered loading and unloading pumps. It is designed to be durable, simple to operate and safe, even with flammable petroleum solvents. It is a batch distiller that will distill up to three 55 gallon drums of contaminated solvents per day, depending on the types of contaminated solvent. It is designed with intrinsically safe Fuji electronic controls.

Rugged: The RSI-55 is manufactured to take the punishment of industrial use. All parts of the RSI-55 except the mounting base are manufactured with 100% stainless steel for rugged good looks and extreme durability. The steel pallet on which the unit is mounted is galvanized . All stainless parts resist all solvents and most acids for outstanding durability. All parts of the solvent distillation system as well as the electronic system design are modular and can be easily replaced if damaged.

Safe: Solvent distillation is controlled by low-voltage, 'Intrinsically Safe' Fuji controllers. High voltage components are housed in NEMA-rated explosion proof housings. The twin 5.5KW heaters operate in an oil jacket, eliminating 'hot spots'. A over temperature breaker in each heater stops the process in case thermal control is lost.

Fast: The RSI-55 has twin 5.5KW 240 Volt electric heaters. The temperature of the heat transfer oil in the oil jacket quickly rises causing the solvent to rapidly reach its vapor point. A water-cooled tube-in-tube condenser provides the most efficient and reliable condensing system available.

Versatile: The RSI-55 is often used to recycle numerous different solvents in the owners location. These solvents can include Antifreeze, Freons, Alcohols, Kerosene, Lacquer Thinners, Acetones, Ketones, Mineral Spirits and Napthas, Terpines, Xylene and other types of solvents and reducers, as well as mixtures of these. They are also used to separate water from oils, salts and other compounds with widely separated boiling points. Check with the factory as to whether a bag should be used when distilling certain solvents. The RSI-55 is mounted on its own fork lift designed galvanized base, and can be transported from one department to another. The RSI-55 should be wired into a circuit breaker of at least 60 amps. (Warning: Users are cautioned to provide adequate ventilation so as to not create an explosive atmosphere around the wall plug connection)

Economical: The RSI-55 recycles large volumes of solvents on-site, greatly increases waste minimization, and lets industrial plants recycle all their solvents to increases profits. The proper use of the RSI-55 insures very quick payback to the purchaser.

Specifications: Height x Width x Depth: 54 x 48 x 60 inches (137cm X 122cm X 153cm) Empty Weight: 1228 pounds (557kg) Shipping Weight: 1413 pounds (641 kg)Input power: 220-240 VAC, single phase, 46 Amps max, 50 - 60 Hz Tank capacity: 56 US gallons (210 liters)

All RSI distillers are designed to meet the requirements of: USA: Class 1. Division 1, Group D. NFPA 483 UNITED KINGDOM: Zone 1, Gas Group 1, B55345 CANADA: C22.2.157: CENELEC: BS 5501