Features:

• Intrinsically Safe electrical design
• Rugged, all stainless construction
• Includes Vacuum System
• Fast Solvent recovery rate
• Simple to Operate
• Explosion proof construction and design
• Mounted on a stainless steel cart
• Wall mounted, safe electrical boxes featuring Fuji controllers
• 240 Volt Circuitry and heater
• Automatic operation: Unattended system shut-off at completion
• Water cooled Tube-n-Tube condenser

Technical Information

The RSI-5 LAB, a 5 gallon tank ( 19 liters) capacity solvent recovery system, like all RSI systems, is designed to be durable, portable, simple to operate and safe. Truly the only 5 gallon portable solvent distillation system manufactured today, the RSI-5 LAB will distill approximately 25 U.S. gallons (95 liters) per week when operated for just one eight hour shift 5 days per week. And like all RSI systems, the RSI-5 LAB is designed with intrinsically safe electronic controls.

Simple: The RSI-5 LAB is "Operator Friendly" and as easy to use as other RSI systems. The operator fills the tank with up to five gallons of dirty solvent, sets the Fuji controller, places the vacuum tank in place, presses the start button on the Fuji and walks away. The water re-circulator is wired so as to be automatic, the system operates unattended and even shuts itself off when completed. The process monitor has a color-coded face plate with suggested process temperature ranges in plain English. Except for keeping the system clean, there is no periodic maintenance.

Safe: The 1.5KW, 120 Volt heater (It is also available in 240 Volt heater) operates in an oil jacket, eliminating A hot spots @ . Solvent distillation is controlled by the low-voltage, 'Intrinsically Safe' thermocouples. High voltage components are all housed in exposed NEMA-rated explosion proof housings. Finally, an over temperature breaker in the heater halts the process in case thermal control is lost.

Rugged: The tank, domed lid assembly, tube in tube condenser, cart, vacuum tank and case of the RSI-5 LAB are 100% stainless steel for rugged good looks, easy cleanup and extreme durability. All stainless parts are easy to reach and clean, and resist all solvents and most acids for outstanding durability. All parts of the solvent distillation system as well as the electronic system design are modular and can be easily replaced if damaged.

Fast: The RSI-5 LAB has a 1.5KW 120 Volt or 240 Volt electric heater for fast, safe solvent recycling. That size heater quickly heats the heat transfer oil in the oil jacket causing the solvent to rapidly reach its vapor point. A water-cooled tube-in-tube condenser provides the most efficient and reliable condensing system available, making the entire system maintenance-free.

Economical: The RSI-5 LAB pays for itself quickly. Recycling on-site and getting the solvents back for reuse increases profits. With the price of solvents going ever upward, and the price of pickup and disposal even more expensive, one does not have to be an accountant to figure out that the purchase and use of an RSI-5 LAB results in a very quick payback to the purchaser.

Specifications : Height x Width x Depth: 52 x 21 x 40 inches (115 x 55 x 104 cm) Empty Weight: 195 pounds (93.5 kg) Shipping Weight: 240 pounds (109 kg) Input power: 110-120 VAC, single phase, 12.5 Amps max, 50 - 60 Hz (Unless special order)Tank capacity: 5 US gallons (18.9 liters)

Vacuum Specifications: Height x Width x Depth: 25 x 22 dia. inches (63 x 56 dia. cm) Empty Weight: 85 pounds (39 kg) Shipping Weight: 105 pounds (49 kg) Input power: Compressed Air, 60 psig, 8.6 CFM max. Tank capacity: 30 US gallons (106 liters)